Niobium

Niobium Rod

Niobium Rod

Description

Parameters

Brief introduction of niobium rod:

What is niobium

? Niobium is a gray metal and its melting point is 2468 ℃, boiling point is 4742 ℃ , density is 8.57 g / cm3. Niobium is stable in air at room temperature. Niobium can be manufactured into many products. Niobium rod is one kind of niobium products.

Niobium rod

is made by shaping, sintering, forging and polishing.
Material: RO4200-1, RO4210-2
Size: ¢3~¢120mm
Standard: As per ASTM B392-98
Purity: ≧99.9%  or  99.95%

Properties of niobium rod:
Properties of niobium rod are as following: good corrosion resistance, high strength in high temperature, high strength and good processing performance.

Applications of niobium rod:
Niobium rod is applied in iron and steel, metallurgy, electron, hard alloy, atomic energy, modern strategic weapons, superconducting technology, scientific research and medical equipment and other fields.

Table.1 Chemical composition:
chemistry%
designation chief component impurities maximum
Nb Fe Si Ni W Mo Ti Ta O C H N
Nb1 Remainder 0.004 0.003 0.002 0.004 0.004 0.002 0.07 0.01 0.004 0.0012 0.002
Nb2 Remainder 0.005 0.005 0.005 0.01 0.01 0.004 0.1 0.015 0.01 0.0015 0.01
 
Table 2. Mechanical requirements (annealed condition)
Grade Tensile strength  δbpsi (MPa), ≥   Yield strength  δ0.2, psi (MPa),≥ Elongation in 1"/2" gage length, %, ≥
RO4200-1
RO4210-2
 18000 (125) 10500 (73)  25 
 
Special requirements to be agreed on by the supplier and buyer of negotiations
         
 
 




Sanhui Co., Ltd can produce niobium rod according to customers’ requirements.
 
 
------分隔线----------------------------