The types and processing of molybdenum tube are deep hole drilling molybdenum tube, sintered molybdenum tube, welding molybdenum pipe, molybdenum reelpipe, drawing molybdenum tube.
Sintered molybdenum tube is used in the production of large molybdenum tube and mainly applied in smelting device, furnace tube, circular target, vacuum heating room, etc.. The largest diameter of molybdenum tube can be 1200mm; welding molybdenum tube is applied in spare parts of equipment which has no strict requirements to the size. Welding molybdenum tubes adopt the vacuum welding and the applied size is not too large, the diameter is 8-500mm; drawing molybdenum tube has complex production and is usually small molybdenum tube and diameter is 1.0-6mm.
Welcome your enquiry.
