2.The power amplifier tube and the current should be adjusted according to the thickness of the material in the process, so that it can match and keep the stability of the current.
3.Molybdenum wire should be tightened after processing for a period of time to prevent the loosening of molybdenum wire and producing jitter, so that it can not only guarantee the quality of processing, but also can avoid broken wires.
4.When the workpiece is going to be completed, it is better to take things against it to avoid the workpiece fall to cut off the molybdenum wire, which is used in the 2 ~ 3mm rigid materials.
5.If the molybdenum wire has wear, as long as adjust the processing gap before processing, it is okay. Thus it also can extend the life of molybdenum wire.
